Honeywell RWD41 Water Defense Water Sensing Alarm

Product Details

Product Dimensions: 1.5 x 7.5 x 7.4 inches ; 7 ounces
Shipping Weight: 8 ounces (View shipping rates and policies)
Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
ASIN: B0049U3XE2
Item model number: RWD41/T

By : Honeywell
List Price : ~~$29.99~~
Price : $22.49
You Save : $7.50 (25%)

Product Description

Amazon.com Product Description
Honeywell’s RWD41 water defense water-sensing alarm presents superior protection against leaks and water harm close to prospective difficulty spots close to plumbing about the home or workplace. Location it in tough-to-see regions about toilet bases beneath sinks behind dishwashers, refrigerators and laundry machines and by water heaters and sump pumps.

RWD41 Water DefenseWater Sensing AlarmAt a Glance:

Beneficial way to beat the high expense of water harm
Water leaks happen most often in the kitchen, laundry area, and bathroom
Plug-and-play functions make for quick installation
Low-battery chirp alert
Dimensions: 9.5 inches by 7.375 inches by 1.five inches

The water defense water-sensing alarm detects leaks near main appliances around the home or workplace..FeaturesThe water-sensing cable detects dampness along its complete four-foot length and can be readily tucked away near appliances or hidden beneath baseboards about carpet. A separate RWD41-compatible eight-foot extension cable (the RWD80) is out there for an even far more extensive range. The base unit (powered by a 9-volt battery, not included) can be mounted on a wall or one other flat surface and comes with a six-foot leader cable. Installation is a cinch thanks to plug-and-play functions built into the system: Just add batteries, plug in the leader cable and the water-sensing cable, and mount the base unit with two-sided tape (which the securing clips also employ to hold the water-sensing cable in place). An 80-decible alert sounds when water is detected, permitting for early discovery and intervention of leaks, and can be turned off by wiping the sensor cable with a dry cloth.
Leak Detection and ProtectionWater harm is the second-top lead to of household insurance coverage claims nationwide, and 80 percent of all property water claims are caused by plumbing and important appliances. A surprisingly significant amount of water can escape from the smallest of cracks--a 1/8-inch crack in a pipe can release up to 250 gallons of water a day. Insurance coverage organizations advocate the installation of water-detection systems like the RWD41 as the ideal protection against the potentially high priced and stressful damage triggered by leaks.
About HoneywellHoneywell is a Fortune 100 organization that can trace its roots back to 1885, when inventor Albert Butz patented the furnace regulator and alarm. At present, Honeywell continues to innovate and manufacture technologies that address challenges linked to international macrotrends such as security, security, and energy.
What's in the BoxWater sensor alarm, mounting tape, 4 feet (1.2 m) of leak-detection cable, six feet (1.8 m) of leader cable, and five cable-securing clips.

The water-sensing cable alerts the base unit to sound an alarm when there’s a leak. (Click every to enlarge)
From the Manufacturer
Patented four-foot cable resolution extends the detection zone provided by conventional spot detectors by 3100% Water Sensing Cable detects water along complete length of cable Spot the cable in spots where you do not commonly observe leaks from water heaters, sump pumps, behind washing machines and dishwashers, under sinks, around toilets four feet of sensing cable is included which can be expanded to 250 feet Base unit is powered by 9 volt Battery (not included) six feet of Leader Cable permits alarm unit to be mounted on walls or yet another area Cable is expandable up to 250 feet - the only system that can run around the complete perimeter of a area or basement Low Battery Chirp Alert

Technical Details

Water Sensing Cable that detects water along entire length of cable
Patented 4-foot cable solution extends the detection zone offered by traditional spot detectors by 3100%
Provides 16 times more coverage than spot detectors
6 feet of Leader Cable allows alarm unit to be mounted on walls or another room
Low Battery Chirp Alert

Customer Reviews

This alarm is ridiculously easy to install. It took maybe 15 minutes (tops) to put it under a bathroom sink, including attaching the cable to the drainpipe. It may take longer to snake the cable behind a washing machine, but it's still really easy.
The cable is very sensitive, and the alarm sounds within a couple of seconds of the cable getting wet. When you dry the cable, it takes less than a second for the alarm to go silent. The alarm is LOUD - loud enough to wake you up.
Like a smoke detector, this alarm just sits there silently, doing its thing, and you never know it's working until ... well, until it works. You should probably test it once a year by wrapping a wet cloth around the cable or dunking it in a cup of water.

Having dealt with a water leak in the past I have always been a little nervous about having the water heaters located indoors in our current home. This gadget goes a long way to giving me some peace of mind regarding when the telltale drip of a water heater on it's last legs might begin.
The device is easy to install and uses a 9V battery. The volume of the alarm is loud and annoying enough make you wake up. The cable has a 6 ft leader cable that allows you to mount it higher up on the wall or in another room but the detecting cable itself is only 4 ft long. If you plan on using it in a laundry room or basement I would recommend getting the extensions for the leak detection cable (also available on Amazon). Each unit can be expanded to 240 feet.
If you're dealing with older water heaters, washing machines or basements that are prone to flooding this really is a terrific investment.